Load Image Channel
The Load Image Channel command replaces the current image with another channel of the same image. The following steps work on the loaded channel.
Use it
- as the first step of a pipeline without an image source (image source None in the pipeline dialog), or
- to switch channels within a pipeline - for example a module that detects nuclei in one channel and cells in another.
Parameters
Section titled “Parameters”| Parameter | Description |
|---|---|
| Channel | The image channel to load. |
| Projection | (optional) How the channel’s z-planes are combined - see Projection. Default Auto. |
| Z Index | (optional) With Projection None: the z-plane loaded (0 = the first). Default 0. |
The objects, the segmentation and the memory slots of the pipeline are not touched - only the image is replaced.
Projection
Section titled “Projection”| Projection | The channel is loaded … |
|---|---|
| Auto | as the project’s z-stack setting does - the same as every other channel |
| Max Intensity, Min Intensity, Avg Intensity, Sum Intensity | as the maximum, minimum, mean or sum of its z-planes, pixel by pixel |
| Take The Middle | as its middle z-plane |
| None | as the single z-plane Z Index |
Any choice other than Auto is meant for a project that analyses one projection or one plane - in a project that analyses the z-planes one by one, the step gets a ⚠ warning: use either one-by-one z-planes or a projection, not both. If the project analyses the z-planes one by one, the pipeline runs once per plane - but on the same loaded image every time, so its objects repeat for every plane.
Objects found on a different projection than the project’s are still drawn over the project’s image, and annotations are matched to the project’s z-planes.
- In a module, the channel of a Load Image Channel step becomes a module parameter when the module is created, so every use of the module can pick its own channel.
- Before an analysis starts, EVAnalyzer checks that every image has the channels the pipelines load. An image without the channel fails with a message naming the channels it does have.
- Focus mode shows the channels a pipeline loads with this command, too.